Botulinum toxin type A (BoNT-A), as Botox, is typically supplied in powder form, except for Innotox. Before use, it must be diluted with saline solution .

Although it may appear like empty vial, if you look at the bottom, you'll notice fine powder. This powder must be diluted with saline solution before use.

A "Botulinum toxin" bottle often looks empty because the product is typically distributed in a highly concentrated powder or liquid form that requires reconstitution with saline before use. The amount of powder or liquid in the vial is minimal, making it seem like there's little inside, but once diluted, it becomes an injectable solution. This concentration is what gives it the potency needed for medical or cosmetic treatments, despite its initially "empty" appearance.

 

The dilution ratio of Botox with saline may vary according to the manufacturer's guidelines, but it is generally used as follows:

- 100 units of Botox: Typically diluted with 2.5 mL of saline. This results in a concentration of 4 units per 0.1 mL.


- 200 units of Botox: Diluted with 5 mL of saline to maintain the same concentration (4 units per 0.1 mL).

The amount of saline used in the reconstitution process can affect the spread of Botox. When less saline is used, the Botox is injected in a more concentrated form, and when more saline is used, the Botox is less concentrated. This can impact the degree to which Botox spreads to surrounding tissues.

Example:
- Botox diluted with 2.5 mL of saline may spread more widely.
- Botox diluted with 2.0 mL of saline will be more concentrated, and the spread range may be reduced.

The spread of Botox can affect the surrounding muscles or tissues at the injection site, so it is important to choose the appropriate dilution ratio depending on the treatment area.

Saline: Typically used for diluting Botox, this is a preservative-free 0.9% sodium chloride solution. Once Botox is diluted with saline, it should be used within 24 hours.

Bacteriostatic water: This contains a preservative called benzyl alcohol, allowing reconstituted Botox to be used for up to 72 hours.

The choice between the two depends on how long you plan to use the reconstituted Botox.

 

 

 

 

https://www.youtube.com/watch?v=BVm4-2fdKkI

----------------------------------------------------------------------------------

Français / French

La toxine botulique de type A (BoNT-A), également connue sous le nom de Botox, est généralement fournie sous forme de poudre, à l'exception d'Innotox. Avant utilisation, elle doit être diluée avec une solution saline.

Bien qu'elle puisse sembler être un flacon vide, si vous regardez le fond, vous remarquerez une fine poudre. Cette poudre doit être diluée avec une solution saline avant utilisation.

 

comment préparer votre produit à base de toxine botulique. <--- cliquez sur la vidéo

 

----------------------------------------------------------------------------------

Español / Spanish

Un frasco de toxina botulínica a menudo parece vacío porque el producto viene en una forma concentrada en polvo o líquido que necesita ser diluido con solución salina antes de su uso. La cantidad de producto en el vial es mínima, lo que hace que parezca vacío, pero su alta concentración lo hace efectivo para los tratamientos.

La toxina botulínica tipo A (BoNT-A), también conocida como Botox, generalmente se suministra en forma de polvo, excepto Innotox. Antes de su uso, debe diluirse con solución salina.

Aunque puede parecer una botella vacía, si miras en el fondo, notarás un polvo fino. Este polvo debe diluirse con solución salina antes de su uso.

 

cómo preparar tu producto de Toxina Botulínica. <--- haga clic en vídeo

 

----------------------------------------------------------------------------------

عربي / Arabic

غالبًا ما تبدو زجاجة توكسين البوتولينوم فارغة لأن المنتج يأتي عادةً في شكل مسحوق أو سائل مركز يحتاج إلى التخفيف بمحلول ملحي قبل الاستخدام. الكمية الموجودة في الزجاجة قليلة جدًا، مما يجعلها تبدو فارغة، ولكنها فعالة جدًا بعد التخفيف.

"السم البوتولينيوم النوع A (BoNT-A)، المعروف أيضًا بـ بوتوكس، عادةً ما يتم توفيره في شكل مسحوق، باستثناء Innotox. قبل الاستخدام، يجب أن يتم تخفيفه بواسطة محلول ملحي. على الرغم من أنه قد يبدو فارغًا مثل زجاجة فارغة، إذا نظرت إلى القاع، ستلاحظ مسحوقًا دقيقًا. يجب تخفيف هذا المسحوق بواسطة محلول ملحي قبل الاستخدام. 

 

كيفية تحضير منتج توكسين البوتولينوم الخاص بك. <--- اضغط على الفيديو

 

----------------------------------------------------------------------------------

日本語 / Japanese

ボツリヌス毒素のボトルは、製品が通常、使用前に生理食塩水で希釈する必要がある濃縮された粉末または液体で供給されるため、空に見えることがよくあります。瓶の中の量は少ないですが、それでも治療に十分な効果を発揮します。

ボツリヌス毒素A型(BoNT-A)、通称ボトックスは、通常粉末形式で提供されます(Innotoxを除く)。使用前には生理食塩水で希釈する必要があります。 ボトルは空のように見えるかもしれませんが、底を見ると微細な粉末が見られます。この粉末は使用前に生理食塩水で希釈する必要があります。 ボトックスの希釈方法については、Celmadeのブログを参照してください。

 

ボツリヌス毒素製品の準備方法。 <--- ビデオをクリック

 

 Un flacon de toxine botulique semble souvent vide car le produit est distribué sous forme de poudre ou liquide concentré, nécessitant une dilution avec du sérum physiologique avant l'utilisation. La quantité dans le flacon est minimale, mais la concentration élevée est efficace pour les traitements.